Copyright 2003, 2005, 2006 Vladimir Prus 
Distributed under the Boost Software License, Version 1.0. 
(See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) 


   Boost.Build V2 release procedure.

[ Must be done from a Unix shell ]

0. Look for all issues for current milestone in the tracker. Close the fixed one,
   if not already closed. Move to a later milestone, or fix all the unfixed
   ones.

   Make sure that "bjam --version" output is correct. Update version string if
   needed. Update bjam version and the version check is necessary.  
   Check the download locations in "index.html". Check that "last modified"
   string in index.html is correct.

1. Make sure you don't have any local modification, and create SVN directory

	https://svn.boost.org/svn/boost/branches/build/Milestone_X
	
   Then, copy:
   
        https://svn.boost.org/svn/boost/trunk/tools/build
	https://svn.boost.org/svn/boost/trunk/tools/jam
	
   to that directory.
  
2. Run

   svn co https://svn.boost.org/svn/boost/branches/build/Milestone_X boost-build

3. Go to "boost-build/build/v2" directory.

4. Run "./roll.sh". This will create "boost-build.zip" and
   "boost-build.tar.bz2" in parent directory, and also upload
   new docs to sourceforge.

5. Unpack "boost-build.tar.bz2", and build jam.

6. Go to "test" and copy "test-config-example.jam" to "test-config.jam".
   If you're not ghost, edit test-config.jam to specify all the right paths.
   Run gcc tests:

      python test_all.py gcc --extras

7. Build all projects in examples-v2, using the bjam binary created at step 4.
   Note: "threading=multi" might be needed to build QT examples.

8. Make SF release:

   - Go to
     https://sourceforge.net/project/admin/editpackages.php?group_id=7586
   
   - Create new Boost.Build release. Name it 2.0-mXX

   - Upload the changelog. Be sure to turn the "Preserve my pre-formatted
     text" checkbox.

   - Rename previously built packages to boost-build-2.0-mXX.tar.bz2
     and boost-build-2.0-mXX.zip. Upload them to the
     /incoming directory on ftp://upload.sourceforge.net

   - Add those file to release, edit file properties.

   - In a separate browser, verify changelog is not damaged.

   - In a separate browser, Download the files and verify checksums.

   - In SF file release interface, send email notice.
       
9. Announce the release, etc.

10. Login to SF and update the current-release redirects in 
    /home/groups/b/bo/boost/htdocs/boost-build2/.htaccess.

11. If any issues were found during release in this document or in 
    test-config-example.jam, commit those changes. The release need
    not be redone, but changes must be comitted.

12. Set release date in changes.txt and commit.